× Mather + Platt are a registered Essential Service Provider during lockdown. Please contact our offices on +27 (0)11 824 4810.

Finder Pompe Industrial, Centrifugal - ISO 2858, ISO 5199

Finder Pompe - Industrial, Centrifugal - ISO 2858, ISO 5199 - VS4 HCV - VXV

Vertical single stage centrifugal pumps derived from ISO 2858/ DIN 24256 Norms. The casing is always immerged in the liquid while a discharge pipe brings the discharge branch to the outside of the plate covering the pit. The standard shaft length varies from 1 to 6 meters. HCV pumps are generally in stainless steel, but can be supplied in other materials or alloys according to the liquid to be pumped. HCV pumps cover a wide range of applications in the chemical process and in the water...



Finder Pompe - Industrial, Centrifugal - ISO 2858, ISO 5199 - VS1-VS6 - CKVN

CKVN - CKVN-B are vertically-suspended, single or multi-stage centrifugal pumps (VS1 or VS6 configuration), designed and built in full accordance with API 610 norms. Bowls are integrally cast diffuser type to assure optimum hydraulic efficiency and minimum radial thrust. A generously sized, carefully designed line shaft assures rotor stability and low vibration level.Rotor axial positioning and support is granted through an oil lubricated double row ball thrust bearing. A rigid couplin...



Finder Pompe - Industrial, Centrifugal - ISO 2858, ISO 5199 - OH1 - VORTEX - VX

Radially split single stage pumps with vortex impeller which allows for certain sizes to handle liquids with suspended solids having a size up to 80% of the nozzle diameters. The packing gland allows the installation of mechanical seals and packing rings of any kind. Upon request, they can be fitted with chambers to cool or heat the casing and/or the stuffing box. They are normally manufactured by using a wide variety of metallurgies, such as cast iron, nodular cast iron, carbon steel,...



Finder Pompe - Industrial, Centrifugal - ISO 2858, ISO 5199 - OH1 - HC

Radially split centrifugal pumps with close impeller complying with ISO 2858/DIN 24256/ISO 5199 Norms. A sturdy and deep stuffing box allows to fit single or double, either conventional or cartridge design mechanical seals. Upon request, they can be equipped with heating/cooling chambers on the pump casing and/or stuffing box. HC Pumps can be manufactured in any material combination depending on actual conditions of service. HC pumps cover a very wide range of applications and are suit...



Finder Pompe - Industrial, Centrifugal - ISO 2858, ISO 5199 - MAGDRIVE - HCMD

Single volute hermetically sealed pump thanks to the replacement of the traditional mechanical seals with magnetic device.This solution allows a substantial reduction of maintenance interventions and, consequently, of the running costs. All the parts included between the motor and the pump casing can be removed without disconnecting the discharge and the suction piping and with no interventions on the motor. In particular, the outer magnet, the oil bracket, the flexible coupling and th...